High-Voltage Components and Custom Automotive Training Kits — Manufacturer in Nashik Since 2008
Manufacturer in Satpur MIDC, Nashik · Export FOB Nhava Shevas (JNPT), Navi Mumbai
About Us
Ameet Electro Systems (AES) is a manufacturer based at Satpur MIDC, Nashik, Maharashtra. We produce two categories of precision-engineered products — both built to specification, neither sold off a generic shelf.
We supply procurement engineers, OEM training managers, and institutional buyers across India and internationally. Our dispatch point is Nhava Sheva (JNPT), Navi Mumbai.
What We Make
Custom Automotive Training Kits
We design and manufacture custom automotive training kits and demonstration boards for OEM dealer networks and automotive technical institutes. Every kit is built to the brief — component selection, fixture layout, power supply specification, and fault-simulation points are all matched to the vehicle model and training objective.
Our training kit range includes:
- Electrical/Electronic Component Learning Kits — three models from entry-level portable bench to dual-voltage advanced kit (90–270VAC wide range; export-ready globally)
- Pneumatics Learning Kit — covers pure pneumatics through to electro-pneumatic control circuits; three fixture boxes with directional control valves, cylinders, logic gate modules, and solenoid valve
- Vehicle Sensor Demo Board — 17 real sensors and relay components from a commercial vehicle platform, mounted on a Plug-N-Play LED display board; learners identify, handle, and refit each component
- Telematics Architecture Concept Rig — teaches the architecture of a connected commercial vehicle, from ECU and CAN bus through to cloud dealer portal; three operating modes (information, GPS, fault)
- Headlamp Circuit Learning Kit — hi-beam and lo-beam circuit with fault-simulation break points; real vehicle components
- Hydraulic Fault Diagnosis Quiz Board — interactive fault identification board with LED and voice feedback (correct / incorrect); designed for tractor hydraulic systems
We have supplied training kits and boards to OEM dealer networks and authorised service centre chains operated by leading commercial vehicle manufacturers, passenger car OEMs, motorcycle manufacturers, and tractor OEMs across India and internationally.
Lead time: 4–8 weeks from confirmed order.
High-Voltage Components
We manufacture high-voltage diode and rectifier components for transformer manufacturers, electrostatic precipitator (ESP) builders, HV test laboratories, and X-ray / medical equipment OEMs.
Our HV component range includes:
- HV Bridge Rectifiers — PCB-type and disc-type; 70 kV (1BR70P) and 95 kV (1BR95P) peak reverse voltage ratings; ETDC vibration-tested
- HV Diode Disc (ARE20A) — 22.5 kV VRRM, 1.4 A forward current in oil; designed for disc-stack bridge assemblies
- HV Diode Strips (RA / RAE series) — 100–200 kV; PCB-integrated; suited for single-polarity rectification in high-voltage power supplies
- HV Resistor Board Assembly — 78 MΩ; designed for electrostatic precipitator (ESP) applications
- Single Pair Protector / Overvoltage Protector — GDT-based; DC sparkover 240–360 V; line protection for communication and signal circuits
Lead time: 2–4 weeks from confirmed order.
Why Buyers Choose AES
Manufacturer, Not a Trader
We design, manufacture, and test in-house at our Satpur MIDC facility in Nashik. We do not resell or sub-contract production. Every component that leaves our facility is built against a confirmed specification.
Built to Your Specification
Catalogue products exist for standard requirements. Where a standard product does not match your vehicle model, circuit topology, or training objective, we design to your brief. This applies to both training kits (OEM dealer networks, TVET institutes) and HV components (transformer assemblies, ESP systems).
Tested and Documented
Our 70 kV and 95 kV bridge rectifiers carry ETDC (Electronics Testing and Development Centre) vibration testing certification. Datasheets are available on request for all HV components.
Export Ready
We ship internationally via FOB Nhava Sheva (Jawaharlal Nehru Port, Navi Mumbai). We have active supply relationships with buyers in Australia, South Africa, and West Africa. Export documentation — commercial invoice, packing list, Certificate of Origin — is handled by us.
MSME Registered, Nashik MIDC
Ameet Electro Systems is UDYAM-registered under India's MSME framework. Our manufacturing facility has been in continuous operation at Satpur MIDC since 2008.
Who We Serve
Frequently Asked Questions
What is the minimum order quantity for training kits?
There is no fixed minimum. We have supplied single prototype units for evaluation and series orders of 50+ units for network rollouts. Contact us with your volume and we will advise on lead time and cost structure.
Do AES training kits work on international power supplies?
The LK-A03-R1 and LK-A01-R1 learning kits have a 90–270VAC wide-range power supply and operate on any grid voltage worldwide — India, Australia (240V), South Africa (230V), Japan (100V), or Europe (230V) — without adaptation. The DB-A01-R4 entry bench is 230VAC only (requires a step-up adapter in North American 120V markets).
Can AES build a training kit for a specific vehicle model?
Yes — this is our core offering. Share the vehicle model documentation, the training objective, and your learner profile. We review the service manual, map components, and design a fixture accordingly.
What high-voltage ratings do your bridge rectifiers cover?
Our PCB-type and disc-type bridge rectifiers are rated at 70 kV (1BR70P, VRRM 210 kV) and 95 kV (1BR95P, VRRM 290 kV). We also manufacture diode discs (ARE20A, 22.5 kV VRRM) and diode strips (RA/RAE series, 100–200 kV). Datasheets are available on request.
What are the export shipping terms?
We ship FOB Nhava Sheva (JNPT), Navi Mumbai. Lead time is 2–4 weeks for HV components and 4–8 weeks for training kits from confirmed order. We provide commercial invoice, packing list, and Certificate of Origin (India). Import customs are the buyer's responsibility.
Where is AES located?
Plot No. 27, Survey No. 76/2A+B, Someshwar Colony, Satpur MIDC, Nashik – 422007, Maharashtra, India. Satpur MIDC is Nashik's primary industrial estate. We are accessible from Nashik Road railway station and Nashik City bus terminus.
Contact Us
To enquire about training kits, HV components, custom builds, or export orders:
Email: ameetsys@yahoo.com
Address
Ameet Electro Systems
Plot No. 27, Survey No. 76/2A+B, Someshwar Colony
Satpur MIDC, Nashik – 422007
Maharashtra, India
GSTIN: 27AHZPP6922A1ZY · MSME UDYAM Registered · Established 2008